BOARDFORM SERIES

PRECAST SURFACE FINISH

Precast concrete is a natural, unpredictable process that does not always produce consistent surface results. By nature, precast applications inherently have air bubbles that will produce a "pitted" or "worm hole" appearance in the surface. Although our casting methods work to reduce this affect, it is never really eliminated, nor controlled, thus producing individual pieces, each uniquely expressive in their surface qualities.

Form and Fiber offers a natural finish in our boardform planters. Once demolded, planters are properly cured before adding interior sealants.

VARIATION IN SURFACE FINISH

Pitting size and pattern contrast will vary as these examples do.

WALL THICKNESS & SIZE LIMITATIONS

1. The standard wall thickness cast for Form and Fiber’s boardform planters is as follows:

   -    3.0” Minimum wall thickness for planters up to 6’-0” L (72”)

   -    3.5” thickness for planters over 6’-0” L (72”) and up to 8’-0” L (96”)

   -    4.0” thickness may be used per manufacturer discretion

   -    Limitations in size will apply over 8’-0” L and/or over 4,000 lbs.

2.  Form and Fiber is able to cast a variety of sizes of boardform planters, however, limitations do apply.

    -    8’-0” MAXIMUM LENGTH with a MAXIMUM WIDTH of 4’-0” or less